Connect X1 with Anker SOLIX Microinverter and EV Charger (both products release later this year) to create a home micro-grid for increased energy independence fueled by free solar power, daily.
Microinverter
User App
EV Charger
Energy Storage System
Energy for Every Situation
Modular Build
Power That Scales with You
The energy optimizer is what makes the modular design possible, allowing you to scale output and capacity based on your needs.
Your Needs
Scale at Minimal Cost
Always-On Power
Ready for the Extreme
Extreme Off-Grid Performance
Power Up with Extreme Toughness
10-Year Warranty
Minimalist Design
Sleek Power for Your Home
5.9" Build Contains It All
Smart Energy, Max Savings
Manage and Control in a Click
Safe and Reliable
knowledge with home energy enthusiasts
and Anker SOLIX experts.
- The calculation of 2350kWh more energy is based on Anker SOLIX X1's 15kWh batteries compared to a traditional home battery over 10 years.
- A soft starter is required when using X1 to power an air conditioner or a heat pump off-grid.
- X1 must contain at least three battery modules to reach 100% power at 131°F.
- 15% more energy at -4°F is calculated using a comparison to Anker SOLIX X1 without a BMS installed.
- According to California's NEM 3.0 plan, the average price of electricity is $2.77 per kWh from Sept. 18th - 19th. The price of buying electricity from the grid follows is $0.65 per kWh. We used the following formula: 4.3X=$2.77/$0.65.
- To be quieter than 40dB, the ambient temperature must be less than 104°F.
3kW with 1 battery module
6kW with 2 battery modules
<40 dB (Ambient Temperature >104℉)
3kW with 1 battery module
6kW with 2 battery modules
4.5kW (10s) with 1 battery module
9kW (10s) with 2 battery modules