Hellow guys, Welcome to my website, and you are watching How I got 6000W of panels on one charge controller!. and this vIdeo is uploaded by Iduna's Orchard at 2022-11-06T07:45:55-08:00. We are pramote this video only for entertainment and educational perpose only. So, I hop you like our website.
| Name | How I got 6000W of panels on one charge controller! |
| Video Uploader | Video From Iduna's Orchard |
| Upload Date | This Video Uploaded At 06-11-2022 15:45:55 |
| Video Discription | Featuring: Victron Energy MPPT RS 450/100 *Important* Please note: the 100 in the product description refers to the current limit of both combined arrays AFTER the voltage has been stepped down by the charge controller. For example: I have two strings of 12 panels that are listed at VMP 30.1 volts and IMP 8.3 amps. Both strings are wired in series so the amps of each string is around 8 amps. However, the charge controller steps down the voltage to charge the 48v system and may then send up to a max 100amps to the battery bank. In my system I have seen over 70amps coming from the controller, but AGAIN the solar panel strings themselves are only pushing around 8 amps through the solar wire! 450 is the voltage limit of each array. 100 is the TOTAL current limit of the charge controller after voltage is stepped down. |
| Category | Film & Animation |
| Tags | Solar | Charge controller | Alternative energy | Off-grid | Solar panels | Energy | Victron |
